This is the unit we will be constructing today, its a High Elf unit similar to White Lions...ish.
I start by making the base so its all ready to have the models glued on, I don't like having little models hanging about waiting for their base, so I get it done first.
I have lost models in the past, swishing dogs tails!
Then the basic former for all my infantry is a 3 mm strip, marked up from the yellow sheet I made myself to keep sizes consistent.
You can see I have made a little stand and painting/gluing device for holding the miniatures as I make them. Once the basic shape is on I leave it to set off and start on the next process.
Cutting all the little bits that make the miniatures look "something like", in this case all the elves have a triangle to represent a cloak and a diminutive double handed axe.
When the basic shape is dry, not too long...10 mins, I start sticking the little components on. I use standard PVA throughout the process.
This part can be very fiddly and frustrating.
But finally all the bits are attached and I'm happy.
Final step is the leave, 10 mins again, then coat with PVA to make sure everything is attached nicely. You really need this step, there's nothing worse than finding bits dropping off at the painting stage.
I haven't shown me painting these as the construction was the main focus, however I use a Stanley knife to cut the strips from the holders and then tweezers and Aleene's Tacky Glue to get them in position.
Finally I give them a coat of acrylic varnish and they're done.
They never look great close up , but are OK in a big group on a table.
